用ASP控制Flash
类别: ASP教程 
Controlling Flash with ASP
A recent project has required a few things that I haven't done for a while. One is dealing with Flash -
which I haven't done since shortly after the release of Flash 3.0. The other is to actually figure some
way of getting dynamic content in without using Generator. One solution we've come up with involves
jumping out of a flash movie into an ASP page, then back again. Of course our designers were a little
miffed, since they've built the flash movie with all sorts of different transitions from place to place,
and this solution would mean starting from the opening scene of the movie evry time. It also stank from a
usability standpoint.
Not so, said I
To accomplish the effect of jumping back in at a specific frame, we simply load some variables into the
flash movie and use them to jump to the right frame. Cool huh?
Initially we had a little trouble, since designers don't need to know anything about ASP, so conveying
information back and forth was a little tricky, but we got there. How it works is like this
In the flash Movie, the first frame has a piece of actionscript which simply reads
GoToAndPlay(scene);
Stop();
The syntax is slightly different in Flash 4.0 - this is Flash 5.0, but you get my drift
Now, when jumping back from the ASP page to the Flash page, we tag a querystring parameter onto the links
flash.asp?scene=awards
flash.asp?scene=services
flash.asp?scene=contact
And so on. The script flash.asp looks something like this...
<%@Language="JScript"%><%
Response.Buffer = true; Response.Expires = -1441;
var s = new String(Request.Querystring("scene"));
strScene = (s!='undefined'&&s!='')?s:'default';
%><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "DTD/xhtml1-transitional.dtd">
<html>
<head>
<title>Flash Control</title>
</head>
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=4,0,2,0"
width="750" height="395">
<param name="movie" value="movie.swf?scene=<%= strScene %>">
<param name="quality" value="high">
<embed src="movie.swf?scene=<%= strScene %>" quality="high"
pluginspage="http://www.macromedia.com/shockwave/download/index.cgi?
P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="750" height="395">
</embed>
</object>
</body>
</html>
So, if we have nothing in the querystring, it loads the scene 'default' - else it loads whatever ASP tells
it to. cool huh?
This trick will work from Flash 4.0 upwards - flash 5.0 is particularly nifty, and i could get to like
it...
A recent project has required a few things that I haven't done for a while. One is dealing with Flash -
which I haven't done since shortly after the release of Flash 3.0. The other is to actually figure some
way of getting dynamic content in without using Generator. One solution we've come up with involves
jumping out of a flash movie into an ASP page, then back again. Of course our designers were a little
miffed, since they've built the flash movie with all sorts of different transitions from place to place,
and this solution would mean starting from the opening scene of the movie evry time. It also stank from a
usability standpoint.
Not so, said I
To accomplish the effect of jumping back in at a specific frame, we simply load some variables into the
flash movie and use them to jump to the right frame. Cool huh?
Initially we had a little trouble, since designers don't need to know anything about ASP, so conveying
information back and forth was a little tricky, but we got there. How it works is like this
In the flash Movie, the first frame has a piece of actionscript which simply reads
GoToAndPlay(scene);
Stop();
The syntax is slightly different in Flash 4.0 - this is Flash 5.0, but you get my drift
Now, when jumping back from the ASP page to the Flash page, we tag a querystring parameter onto the links
flash.asp?scene=awards
flash.asp?scene=services
flash.asp?scene=contact
And so on. The script flash.asp looks something like this...
<%@Language="JScript"%><%
Response.Buffer = true; Response.Expires = -1441;
var s = new String(Request.Querystring("scene"));
strScene = (s!='undefined'&&s!='')?s:'default';
%><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "DTD/xhtml1-transitional.dtd">
<html>
<head>
<title>Flash Control</title>
</head>
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=4,0,2,0"
width="750" height="395">
<param name="movie" value="movie.swf?scene=<%= strScene %>">
<param name="quality" value="high">
<embed src="movie.swf?scene=<%= strScene %>" quality="high"
pluginspage="http://www.macromedia.com/shockwave/download/index.cgi?
P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="750" height="395">
</embed>
</object>
</body>
</html>
So, if we have nothing in the querystring, it loads the scene 'default' - else it loads whatever ASP tells
it to. cool huh?
This trick will work from Flash 4.0 upwards - flash 5.0 is particularly nifty, and i could get to like
it...
- 上一篇: 使用索引服务器 - 增加属性
- 下一篇: 如何使用asp创建dsn?
